Bypass Pickup Solenoid (Sol2) - Toshiba e-STUDIO182 Service Manual

(3) Take off the actuator with the spring while
pushing the bracket stays wider.
(4) Release 2 latches, take off the bypass paper
sensor, and disconnect the connector.
9.5.8

Bypass pickup solenoid (SOL2)

(1) Take off the bypass unit.
P.9-10 "9.5.1 Bypass unit"
(2) Remove 1 screw.
© 2009 TOSHIBA TEC CORPORATION All rights reserved
Spring
Fig. 9-21
Bracket
Bypass paper sensor
Fig. 9-22
Bypass unit
Fig. 9-23
9 - 15
Actuator
Bracket
Connector
Screw
e-STUDIO182/212/242
PAPER FEEDING SYSTEM
9