Polaris RZR XP 1000 Service Manual page 102

ENGINE / COOLING SYSTEM
19. Remove the six fasteners that attach the exhaust
head pipe to the engine. Remove the two exhaust
springs that attach the head pipe
Remove exhaust head pipe towards the front of the
vehicle. Discard exhaust gaskets
20. Remove the four fasteners retaining the box support
and the two fasteners retaining the box support
11
bracket . Remove the push rivet that attaches the
12
heat shield to the rear cross member.
13
3.26
to the muffler.
9
.
10
9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual
© Copyright 2014 Polaris Industries Inc.
21. Place a suitable drain pan under the vehicle and
remove the thermostat housing coolant hose
the water pump coolant hose
Dispose of engine coolant properly.
22. Use an overhead or portable engine hoist and
suitable engine straps to secure engine in its current
position.
23. Remove the four rear mounting bolts
the rear of the engine to the transmission.
NOTE: It is not necessary to remove the bolts
that retain the bracket
and
14
from the engine.
15
that attach
16
to the transmission.
17