Polaris RZR XP 1000 Service Manual page 475

14. When the display flashes the distance setting, tap
the MODE button to advance to the desired setting.
15. Press and hold the MODE button to save the setting
and advance to the next display option.
9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual
16. Repeat the procedure to change remaining display
© Copyright 2014 Polaris Industries Inc.
settings.
Under / Over Voltage
This warning usually indicates that the vehicle is
operating at an RPM too low to keep the battery
charged. It may also occur when the engine is at idle
and a high electrical load is applied (lights, cooling
fan or other accessories).
If battery voltage drops below 11 volts, a warning
screen will display "Lo" and provide the present
battery voltage. If voltage drops below 8.5 volts, LCD
backlighting and icons will turn off.
If battery voltage rises above 15 volts, a warning
screen will display "OV" and provide the present
battery voltage. If voltage rises above 16.5 volts,
LCD backlighting and icons will turn off.
Park Brake Indicator (INT'L Model Only)
This warning is used to notify the operator that the
park brake lever is engaged.
When the park brake is fully engaged, "BRAKE"
appears in the rider information display. Engine
speed is limited to 1500 RPM in all gears, except
ELECTRICAL
11
11.9