Polaris RZR XP 1000 Service Manual page 188

FUEL SYSTEM
6. Disconnect the fuel injector harness leads
7. Hold a shop towel over the fuel line fitting and
remove the fuel supply line
8. Remove tie strap retaining the injector harness leads
to the fuel rail. Remove the two screws
the fuel rail to the throttle body using a 5 mm Allen
wrench.
4.22
.
from the fuel rail.
that mount
9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual
© Copyright 2014 Polaris Industries Inc.
9. Carefully pull up on the fuel rail
remove them from the throttle body as an assembly.
Take care not to damage the fuel injector ends
during removal.
10. Pull out on the fuel injector retaining clip and pull the
injector out of the fuel rail. Repeat on the other
injector if removal is necessary.
11. Upon installation of the new fuel injectors, lightly
lubricate the injector O-rings to aid installation.
and injectors and