Engine Disassembly / Inspection - Top End; Valve Cover Removal; Camshaft Removal - Polaris RZR XP 1000 Service Manual

ENGINE DISASSEMBLY / INSPECTION - TOP END

Valve Cover Removal

NOTE: The valve cover can be removed with the
engine installed in the chassis.
1. Remove the four valve cover shoulder bolts
isolators using a T40 driver.
2. Replace isolators
replace valve cover seal
3. Remove the spark plugs
with shop towels to prevent anything from falling into
the combustion chamber.
9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual
and
1
when they are removed and
if oil leaks are evident.
. Stuff spark plug holes
© Copyright 2014 Polaris Industries Inc.
ENGINE / COOLING SYSTEM

Camshaft Removal

NOTE: The camshafts can be removed with the
engine installed in the chassis.
1. Rotate the engine so the PTO cylinder is at Top
Dead Center (TDC) to relieve most of the valve
spring pressure. The camshaft lobes should face out
and the slots on the end of the camshafts should
1
line up.
2. Remove the hydraulic cam chain tensioner
the cylinder. Replace the sealing washer
reassembly.
3
from
upon
3.33