Shock Compression Adjustment
The compression damping adjustment is located on the
shock 'Piggyback' reservoir of each shock. Damping
adjustments can be made without using any tools.
NOTE: When the adjuster knob is turned counter-
clockwise until it stops, the damping is in the fully
open position (softest).
Turn
the
adjuster
knob
compression damping. Turn the adjuster knob counter-
clockwise to decrease compression damping.
NOTE: The recommended factory setting for the
front and rear shocks are provided in the following
compression adjustment tables.
Walker Evans™ 2.0" Front Shock:
Compression Adjustment Table
SETTING
COMPRESSION DAMPING
Full counter-clockwise position
Softest
Factory
6 clicks from softest position
Full clockwise position
Firmest
9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual
clockwise
to
increase
© Copyright 2014 Polaris Industries Inc.
Walker Evans™ 2.5" Rear Shock:
Compression Adjustment Table
SETTING
COMPRESSION DAMPING
Full counter-clockwise position
Softest
Factory
7 clicks from softest position
Full clockwise position
Firmest
The rear shock adjuster can be found on the remote
reservoir. Clockwise will increase damping and counter-
clockwise will decrease damping.
MAINTENANCE
2.41
2