Spider Removal; Roller, Pin, And Thrust Washer Inspection - Polaris RZR XP 1000 Service Manual

Spider Removal

1. Install clutch onto holding fixture (2871358-A) and
secure in bench vice. Loosen and remove the spider
jam nut (counterclockwise) using the Clutch Spider
Nut Socket (PU-50578).
Clutch Spider Nut Socket: PU-50578
Clutch Holding Fixture: PN 2871358-A
2. Loosen and remove the spider (counterclockwise)
using Clutch Spider Removal / Installation Tool (PN
2870341).
Spider Removal / Installation Tool: 2870341
Clutch Holding Fixture: 2871358-A
9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual

Roller, Pin, and Thrust Washer Inspection

1. Inspect all rollers, roller bushings and roller pins by
2. Turn roller with your finger. If you notice resistance,
© Copyright 2014 Polaris Industries Inc.
pulling a flat metal rod across the roller.
galling, or flat spots, replace the drive clutch.
NOTE: Rollers, pins, thrust washers and buttons
are not serviceable at the time of this publication.
PVT SYSTEM
5
5.21