Throttle Body Assembly; Operation Overview; Throttle Body Service; Throttle Body Removal - Polaris RZR XP 1000 Service Manual

Hide thumbs Also See for RZR XP 1000:

Table of Contents

THROTTLE BODY ASSEMBLY

Mounted to the cylinder head, the dual throttle body

assembly provides the proper air/fuel ratio needed for

engine operation.

The throttle body assembly also includes the Electronic

Throttle Control and Idle Air Control.

The throttle body assembly is a non-serviceable

component. However, the fuel rail, fuel injectors, and the

Temperature and Manifold Pressure Sensor (TMAP) can

be serviced separately (see Chapter 4 –

INJECTORS, page 4.20 and Temperature / Manifold

Absolute Pressure (T-MAP) Sensor, page 4.31).

9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual

1. Remove the cargo box assembly (See Chapter 10 –

Cargo Box Assembly Removal, page 10.22).

2. Be sure the engine has cooled enough to work on.

3. Loosen the hose clamps

to the throttle body.

4. Remove the two screws

5. Remove the driver's seat and disconnect the

negative battery cable.

retaining the intake

Table of Contents

Rzr xp4 1000