Polaris RZR XP 1000 Service Manual page 249

Hide thumbs Also See for RZR XP 1000:

Table of Contents

5. Press down on the top of the spider assembly,

pushing the spider onto the shaft. Remove snap ring

and slowly release the assembly.

6. Remove the spider assembly and spring

NOTE: Spring is compression only and has no

torsional wind.

9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual

7. Remove the inside spider plate

8. Remove the E-clips

9. Remove the clutch assembly from the holding tool.

10. Press out the spring pins

. Inspect the spider dampener for wear

and replace if needed.

. Inspect the rollers for wear; replace if worn.

, and the clutch

in the inner sheave.

Chapters

Table of Contents

Rzr xp4 1000