Polaris RZR XP 1000 Service Manual page 253

3. Line up the "X" on the moveable sheave with the "X"
on the stationary sheave or use the marks previously
used. Put the sheaves together.
4. Install the roller (A) onto the roller pin (B) on both
sides.
9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual
5. Install the roller pin into the sheave assembly on
6. Install the spring pins (C) to secure the roller pins.
7. Install the spring over the shaft.
8. Install the clutch rollers (D) onto each side of the
© Copyright 2014 Polaris Industries Inc.
both sides. The flat side of the roller pin faces
downward when the shaft side is laying flat on the
bench.
Install until flush with sheave surface.
outside spider. Install the washers (E) and E-clips (F)
to secure the rollers. The rollers should spin freely.
PVT SYSTEM
5
5.33