Panasonic UF-6300 Service Manual page 209

No. Parameter
51 REMOTE
DIAGNOSTIC
52 DIAG.
PASSWORD
53 SUB-ADDRESS
PSWD
54 FAX FORWARD
56 COVER SHEET
58 LANGUAGE
63 PC-FAX RCV
MODE
65 PRINT
COLLATION
82 QUICK MEMORY
XMT
99 MEMORY SIZE
(Flash Memory)
117 MULTI STATION
125 CONFIRM
STATIONS
Setting
Setting
Number
1 INVALID
2 VALID
(----)
(----)
1 INVALID
2 VALID
1 OFF
2 ON
1 A-ENGLISH Selecting the language to be shown on the display and
2 C-FRENCH
3 SPANISH
1 PRINT
2 UPLD&PRT
3 UPLOAD
1 INVALID
2 VALID
1 INVALID
*2 VALID
- -
1 INVALID
2 VALID
1 INVALID
2 VALID
Selecting whether or not the machine accepts to update
the firmware or Remote Diagnostics from the remote
station. Please ask your Panasonic Authorized Dealer for
details.
Setting the password for Remote Diagnostic Mode.
Please ask your Panasonic Authorized Dealer for details.
Setting a 20-digit password for secured sub-address
communication.
Selecting whether the machine performs Fax Forwarding
to the specified destination.
Setting the home position of the Cover Sheet parameter
in the Select Mode.
reports.
Selecting how the machine will execute the received Fax
document(s). If the setting is set to either "Upload" or
"Upload & Print" the machine cannot enter the Sleep
Mode. Mode.
PRINT : Print the received document(s).
UPLD&PRT: Print the received document(s) and upload
it's file.
UPLOAD : Upload the received document file.
Selecting whether the machine prints out documents in
sequence.
Selecting whether the machine performs Quick Memory
Transmission.
INVALID: Stores all documents into memory first before
dialing the telephone number.
VALID : Starts dialing the telephone number
immediately after storing the first page.
The Quick Memory Transmission feature (Fax Parameter
No. 82) is not available when the Job Build is set to
"2:ON".
Displays the memory size.
Set the default setting for the Multi Station function.
INVALID: The document is sent to a single destination
only.
VALID : Allows sending the document to multiple
destinations.
Set whether to confirm the destinations.
When set to Valid the document cannot be sent unless
the destination is confirmed.
This function also operates when the addresses are
specified with Group Dialing or Program Dialing function.
If an address has been altered (added or removed) when
confirming addresses, the address confirmation message
will appears again when transmitting the documents
(pressing the start key).
209
Comments