2.2.11. Paper Feed Solenoid (531), Clutch Gear Assembly, Paper Feed Roller (518)
(2)
(7)
(6)
(5)
(4)
(3)
(9)
(10)
(1) Remove the Right Cover (102) (Refer to 2.2.2.).
(2) Remove 1 Screw (19).
(3) Remove the Paper Feed Solenoid (531).
Note:
If the Paper Feed Solenoid does not work properly
due to dust, etc., remove the spring to disassemble,
and clean the magnet, and the plate as illustrated.
(4) Remove 1 Screw (19).
(5) Remove the Feed Roller Ground Spring (628).
(6) Remove the Snap Ring (B9).
(7) Remove the Clutch Gear Assembly.
(8) Place the machine on its Rear side.
(9) Remove 2 Screws (19).
(10) Remove the Feed Roller Assembly.
Clean the Paper Feed Rollers (518) with a soft cloth,
dabbed in isopropyl alcohol.
40