Panasonic UF-6300 Service Manual page 258

Data is then transferred to the Spooler, and the
10.
update is started.
The Spooler screen appears automatically
showing the progress of the data transfer.
The spooler will take time to open depending on
the number of addresses to update.
When the transfers are completed, all jobs in the
11.
spooler disappear, and the communication log is
displayed.
After the firmware code is successfully
programmed to the Firmware Flash Memory in
the device, the device will shut down and reboot
automatically.
Click [Finish].
A Firmware Deletion confirmation screen will
12.
appear.
Click [Yes] to delete the firmware code files that
you used for the update, or click [No] to keep the
firmware code files in your PC for future use.
Network Firmware Update Tool (LAN)
Page 13