2.2.10. SC PC Board (1001), ILS PC Board (1006), SNS4 PC Board (1007)
(6)
(10)
(3)x7
(2)
(7)
(9)
(8)
(1) Remove the Left Cover (Refer to 2.2.2.).
(2) Disconnect all Connectors on SC PC Board.
(3) Remove 7 Screws (19).
(4) Remove the SC PC Board (1001).
(5) Move all Harnesses away from the front of the Door
Sensor.
(6) Release the Latch Hook, and remove the ILS PC
Board (1006).
(7) Disconnect Connector CN73 on the ILS PC Board
(1006).
(8) Disconnect Connectors CN85, and 87 on the SNS4
PC Board.
(9) Remove 1 Screw (19).
(10) Lift up the Paper Exit Actuator (730), and remove
the SNS4 PC Board (1007).
39