Spe: Specification Of Test Selection (From Host To Analyzer); Contents Of Text - Hitachi 902 Service Manual

(3) SPE: Text for test selecting information inquiry (from analyzer to host)
(a) Composition of text
STX
(b)

Contents of text

For the contents of text, refer to "16.6.2 Contents of Text."
(c) Text type
Text for a routine or stat sample alone is sent.
(d) Condition for inquiry to host
1) When test selection on the analyzer side includes a sample for which no test is
requested (provided [YES] is specified for full-time inquiry)
2) When an ID read error has occurred with the barcode reader is provided. At
this time, ID No. becomes blank.
(e) Condition for rejecting inquiry to host
[YES] is specified for the transfer of analytical data alone on the communication
parameter screen.
(f) Whether test selection inquiry is made to the host for every sample or only when no
test is selected on the analyzer side is selectable by the full-time inquiry parameter
on the communication parameter screen.
1) When [YES] is specified for full-time inquiry, inquiry is made regardless of test
selecting registration on the analyzer side.
2) When [NO] is specified for full-time inquiry, inquiry is made only when test
selection on the analyzer side includes a sample for which no test is requested.
(g) When [YES] is specified for the original Abs., test selection inquiry is not made to
the host.
(h) At inquiry in the real-time mode with or without ID, a sample No. is added. (Sample
information is detailed below.)
1) Items to be set with ID
2) Items to be set without ID
(4)

SPE: Specification of test selection (from host to analyzer)

(a) The composition of SPE text is shown below. For the contents of text, refer to
"16.6.2 Contents of Text."
STX ;
(b) Test selecting information request from the host will correspond to sample
information sent upon test selection inquiry. If not, however, it is taken into the
analyzer and inquiry is not made again.
(c) If a time-out error, hardware error or any other error occurs, the relevant sample is
considered to have not been received and is ignored after occurrence of the alarm.
(d) When no request is made for all of the test selecting information received on the
host side, it is registered that none is requested.
(e) When the barcode reader is provided, the analyzer ignores the sample No. of
routine sample even if it is sent from the host.
(f) Even when the same ID No. is transferred to the analyzer multiple times with the
barcode reader provided, registration will be made in response to position No.
; Fu Sample information
(Fu: Function character)
..............
........
Fu Sample information
ETX
Sample No., position No., ID No.
Sample No., position No., ID No. (treated as
comment) (allowed even if inquiry ID is different)
Channel Test selecting
count information
16 - 26
(5)
Space ETX BCC