NEC NEFAX 671 Service Manual page 124

No. Function
This function can be used to pro-
gram one-touch dial keys (No. 61
to 64) with fax numbers and a
transmission/reception function
(such as timer transmission or poll-
ing reception), allowing that func-
tion to be carried out by pressing
just the corresponding one-touch
dial key.(NEFAX 691 only)
PROGRAM
4
DIAL
This function can be used to spec-
ify the batch transmission setting
(transmission time) for a one-touch
dial key programmed with recipient
fax numbers, so multiple docu-
ments can be stored in the mem-
ory and sent out together at the
5 BATCH TX
specified time.
This function can be used to spec-
ify mailbox IDs in order to receive
faxes with mailbox reception only if
the mailbox ID sent by the caller
matches the mailbox ID set on this
machine.
6 MAILBOX
Purpose Setting Details/Precautions
If one-touch dial keys have
been programmed with fax
numbers and a transmission/
reception function, that func-
tion can be carried out by
pressing just the correspond-
ing one-touch dial key.
The function of registration
Func-
tion
No.
1
2
3
6
7
If the batch transmission setting
(transmission time) is specified
for a one-touch dial key pro-
grammed with recipient fax
numbers, multiple documents
can be stored in the memory
and sent out together at the
specified time.
A one-touch dial key must first
be programmed with the fax
number of the recipient for the
batch transmission.
Cannot set for e-mail address.
Mailbox IDs must first be speci-
fied in order to receive faxes
with mailbox reception only if
the mailbox ID sent by the
caller matches the mailbox ID
set on this machine.
A mailbox ID cannot be the
same as a relay box ID.
Setting value: 0000 to 9999
Password: Setting range 0 to
9999, or none.
S-29
Descrip-
Function
tion
BROAD- Up to 50
CAST detection
TIMER TX -
MAIBOX TX -
POLLING Up to 50
RX detection
RELEY INI-
-
TIATE