NEC NEFAX 671 Service Manual page 127

No. Function
This function can be used to set
the default setting ("ON" or "OFF")
for adding the header (date sent,
sender's name and fax number,
etc.) when sending faxes.
4
HEADER
Purpose Setting Details/Precautions
The default setting is "ON".
Setting value
The contents of registration.
• TX data and time.
• Transmitter's own name.
• Transmitter's own tel number.
• Session number.
• Page number.
• Total page number (only dis-
played by use the memory
TX job).
It is selectable by soft switch
to transmit only pages which
have failed to transmit, if
communication error occurs
on the way transmitting docu-
ment. In this case, page num-
ber on Header Print is
continued from the page
number of the document suc-
cessfully transmitted.
Whether user setting is
allowed or not is selectable
with Soft switch.
For North America, Header
print is set ON, and setting
change to OFF by the user is
not allowed.
Attaching Header Print:
Image within 4 mm (1/4 in) top
margin of transmitting docu-
ment is not transmitted and
Header print data is attached.
S-32
Description
ON Add header
OFF No header