Table of Contents
Advertisement
Lower Fusing
Roller section
4136D022AA
Upper Fusing
Roller
section
4136D040AA
4980D068AB
4. Remove two bushings and the Pressure Roller.
Precautions for Installation of Bushings
• Make sure that the slits in the bushing are properly
aligned with the rib of the Fusing Unit.
5. Remove one screw and the Thermistor.
NOTE
• When reinstalling the Thermistor, route the har-
ness as shown in the illustration.
D-30
Advertisement
Chapters
Table of Contents
Troubleshooting
