NEC NEFAX 671 Service Manual page 178

(2) SRAM clear
• To clear the settings for the functions listed at the right and return the functions to their
default settings.
• The following items are cleared (initialization).
NOTES
• Before executing "SRAM CLEAR," be sure to record the setting values that are to be ini-
tialized through "SRAM CLEAR."
• For the record of the setting values, it is a good idea to have reports and lists printed.
☞ S-11 "Status mode/ Print report"
☞ S-75 "Service mode/ Reporting"
• Some setting values are not included any of these reports or lists. Be sure to make a
note of them separately.
• After "SRAM CLEAR" has been executed, make necessary entries of data again based
on the setting values recorded.
MODE Initialized Items
MACHINE SETTING
ADMIN. MANEGE-
MENT
FAX REGISTRATION
TX OPERATION
RX OPERATION
UTILITY
MODE
COMM. SETTING
REPORTING
INIRTIAL USER DATA DATE & TIME
NETWORK SETTING
Default
BUZZAR VOLUM LOW
REMOTE MONITOR OFF
ONE TOUCH DIAL None
SPEED DIAL None
GROUP DIAL None
PROGRAM DIAL None
BATCH TX None
MAIL BOX None
RELAY BOX None
SCAN CONTRAST 0
RESOLUTION STD
DEFAULT TX MEM. TX
HEADER ON
MEMORY RX MODE OFF
NO. of RINGS 2
REDUCTION RX ON
RX PRINT MEMORY RX
RX MODE AUTO RX
FORWARD OFF
FOOTER OFF
SELECT TRAY ENABLE
CLOSED NETWORK\ OFF
LINE MONITOR LOW
PSTN/ PBX PSTN
ACTIVITY REPORT ON
RESERV. REPORT OFF
TX RESULT REPORT OFF
RX RESULT REPORT OFF
None
USER FAX NO. None
USER NAME None
IP ADDRESS AUTO
SUBNET MASK None
GATE WAY None
DNS CONFIG DISABLE
S-83
Report/ List
☞
MACHINE STATUS LIST
S-11
☞
S-15
None None
☞
ONE TOUCH LIST
S-11
SPEED DIAL LIST
☞
S-13
KEY SETTING LIST
☞
MACHINE STATUS LIST
S-15
☞
MACHINE STATUS LIST
S-11
☞
S-15
☞
MACHINE STATUS LIST
S-11
☞
S-15
☞
MACHINE STATUS LIST
S-11
☞
S-16
☞
MACHINE STATUS LIST
S-11
☞
S-16
☞
MACHINE STATUS LIST
S-11
☞
S-16
☞
MACHINE STATUS LIST
S-11
☞
S-16