(4)
Total clear
• The following counter are cleared (initialization).
PM counter
Scan counter
NOTES
• After the "TOTAL CLEAR" function is performed, turn the machine off, then on again.
• The clearance of "TOTAL COUNTER" can not be performed.
(5)
TOTAL counter (clear)
• To clear the TOTAL COUNTER value.
(6)
PM counter (clear)
• To clear the PM COUNTER value.
(7)
I/C counter (clear)
• To clear the I/C COUNTER value.
(8)
Application counter (clear)
• To clear the APPLICATION COUNTER value.
(9)
Scan counter (clear)
• To clear the SCAN COUNTER value.
<Exiting Procedure>
• Press the Panel Reset key.
I/C counter
Application counter
S-87