Timing Chain And Chain Tensioner Inspection - Suzuki Liana RH413 Service Manual

9) Install timing chain tensioner adjuster assembly (1)
with a retainer (2).
Tighten adjuster bolts to specified torque and then
remove a retainer from chain tensioner adjuster
assembly.
Tightening torque
Timing chain tensioner adjuster bolt (a): 11 N·m
(1.1 kgf-m, 8.0 lb-ft)
10) Apply engine oil to timing chain and then turn
crankshaft clockwise by 2 revolutions and check that
match marks (1) on intake and exhaust camshaft
timing sprockets are in match with notches (2) on
cylinder head and key (3) is on upside of crankshaft
as shown in the figure.
If each mark of timing chain and each match mark
are no matches, adjust each sprocket and timing
chain.
1
11) Install timing chain cover referring to "Timing Chain
Cover Removal and Installation".
12) Perform Steps 3) to 8) of "Installation" of "Timing
Chain Cover Removal and Installation".
I2RH0B140066-01
1
2
3
I2RH0B140067-01

Timing Chain and Chain Tensioner Inspection

Timing Chain No.1 Guide
Check shoe (1) for wear or damage.
Timing Chain Tensioner
Check shoe (1) for wear or damage.
Crankshaft Timing Sprocket
Check teeth of sprocket for wear or damage.
Timing Chain
Check timing chain for wear or damage.
Engine Mechanical: 1D-22
S3RH0A1406027
I2RH0B140068-01
I2RH0B140069-01
I2RH0B140070-01
I2RH01140077-01