Repair Instructions; Oil Pan And Oil Pump Strainer Components; Oil Pan And Oil Pump Strainer Removal And Installation - Suzuki Liana RH413 Service Manual

1E-3 Engine Lubrication System:

Oil Pan and Oil Pump Strainer Components

[A]: Sealant application amount
"a": 3 mm (0.12 in.)
"b": 2 mm (0.08 in.)
Oil Pan and Oil Pump Strainer Removal and
Installation
Removal
1) Remove oil level gauge.
I2RH0B150005-01

Repair Instructions

1. Oil pan
: Apply sealant 99000-31250 to mating surface.
2. Strainer
S3RH0A1506002
9) Start engine and check oil pressure switch for oil
leakage. If oil leakage is found, repair it.
10) Connect oil pressure switch coupler (1).
3. O-ring 8. Oil pan nut
4. Gasket 9. Oil pan bolt
5. Drain plug : Tightening torque
6. Strainer bolt : Do not reuse.
7. Bracket bolt
2) Remove exhaust No.1 pipe and exhaust manifold
stiffener referring to "Exhaust Pipe Removal and
Installation in Section 1K".
3) Drain engine oil by removing drain plug.
I2RH0B150006-01
S3RH0A1506001
I3RH0A150001-01