Front Wheel Hub And Steering Knuckle Components; Front Wheel Hub And Steering Knuckle Removal And Installation - Suzuki Liana RH413 Service Manual

Front Wheel Hub and Steering Knuckle Components

1. Front wheel hub
2. Circlip
3. Wheel bearing
: Face grooved rubber seal side to wheel hub.
Front Wheel Hub and Steering Knuckle
Removal and Installation
Removal
1) Hoist vehicle and remove wheel.
2) Uncaulk drive shaft nut (1).
3) Depress foot brake pedal and hold it there. Remove
drive shaft nut (1).
4) Remove caliper carrier bolts.
4. Steering knuckle
5. Drive shaft nut
: Calk, after tightening.
6. Hub bolt
5) Remove caliper (1) with carrier.
NOTE
S3RH0A2206010
Hang removed caliper with a wire hook or the
like (3) so as to prevent brake hose (4) from
bending and twisting excessively or being
pulled.
Don't operate brake pedal with pads
removed.
6) Pull brake disc (2) off by using two 8 mm bolts.
I2RH01220026-01
Front Suspension: 2B-11
S3RH0A2206009
I2RH01220025-01
: Tightening torque
: Do not reuse.
I2RH01220027-01