Transfer; General Description; Transfer Description - Suzuki Liana RH413 Service Manual

3C-1 Transfer:

Transfer

Driveline / Axle

Transfer Description

The transfer is mounted on transaxle case by fastening bolt with reduction drive gear in transfer and differential case in
transaxle coupled by involute spline. Driving force from transaxle is transmitted to propeller shaft through reduction
drive gear, reduction idler gear, reduction driven gear and bevel gear of transfer. As bevel gears, which change the
direction of driving torque axis to the direction of the angle with 90 degrees, hypoid gears are provided. Hypoid gears
have an advantage of preventing gear noise, at the same time, they require accurate adjustment of tooth contact and
backlash.
1. Intermediate shaft
2. Left case
3. Reduction drive gear
4. Right case

General Description

5. Reduction idler gear
6. Reduction driven gear
7. Bevel gear
8. Bevel pinion shaft
9. Spacer
10. Transfer output retainer
11. Transfer output flange
*: Forward
S3RH0A3301001
I4RH01330001-01