Rear Differential Disassembly And Assembly - Suzuki Liana RH413 Service Manual

3B-7 Differential:
9. Differential side taper roller bearing
10. O-ring
11. Differential side oil seal
: Apply grease 99000-25010 to seal lip.
12. Retainer

Rear Differential Disassembly and Assembly

Disassembly
1) Remove differential cover (1).
2) Remove breather plug (2) from differential cover (1).
3) Remove differential side bearing stopper and then
remove differential side bearing retainer.
Special tool
(A): 09923-58520
4) Using some appropriate rod (1), drive out differential
side bearing outer races (2).
NOTE
When driving out differential side bearing
outer races, be very careful not to cause
damage to tooth surface of bevel gear.
21. Differential cover
: Apply sealant 99000-31260 to mating
surface with differential carrier.
22. Differential side washer
23. Differential side gear
24. Differential pinion shaft
5) Remove bevel gear assembly (3).
S3RH0A3206006
6) Remove bevel gear bolts (1) and then remove drive
bevel gear (2).
7) Remove differential side bearings (3).
I3RH01322019-01
8) Drive out differential side pinion shaft pin with special
tool and hammer.
Special tool
(B): 09922-85811
9) Disassemble differential side gears (2), pinions (3),
washers and shaft (4) in differential case (1).
I3RH01322020-01
10) Remove caulking of bevel pinion nut with special tool
and power wrench (1).
Special tool
(C): 09930-40113
: Apply differential oil.
: Tightening torque
I3RH01322021-01
I3RH01322022-01
I3RH01322023-01