Differential Assembly Components - Suzuki Liana RH413 Service Manual

5A-132 Automatic Transmission/Transaxle:
Reassembly
Reverse disassembly procedure for assembly, noting
following points.
• Shift solenoid valve-A and -B are identical
• After applying A/T fluid to new O-rings, fit them to
solenoid valves, then install solenoid valves to valve
body.
• Tighten solenoid valve bolts to specified torque
Tightening torque
Solenoid valve bolt (a): 11 N·m (1.1 kgf-m, 8.0 lb-ft)
Solenoid valve bolt specification
Bolt Length "a"
A (1) 49 mm (1.93 in.)
B (2) 20 mm (0.79 in.)

Differential Assembly Components

1. Differential side RH bearing
2. Output shaft speed sensor / VSS drive gear
3. Differential case subassembly
4. Final gear
Pieces
5
1
5. Side bearing shim
6. Final gear bolt
7. Side bearing cup
8. Differential side LH bearing
I2RH0B510223-01
S3RH0A5106052
I2RH0B510224-01
: Apply automatic transaxle fluid.
: Tightening torque
: Do not reuse.