Rear Differential Front Mounting Removal And Installation; Rear Differential Rear Mounting Removal And Installation - Suzuki Liana RH413 Service Manual

3B-3 Differential:
Rear Differential Front Mounting Removal and
Installation
Removal
1) Hoist vehicle.
2) Remove mounting bracket bolts (1), mounting bolt
(2), nut (3) and differential front mounting (4).
3
4
1
3) Drive mounting out with special tools and hydraulic
press (1).
Special tool
(A): 09951-16080
(B): 09951-26020
Installation
1) Press mounting in front mounting bracket (1) by
using special tools and hydraulic press (2) with
caring its installation position shown in the figure.
Special tool
(A): 09951-16080
(B): 09951-26020
1
S3RH0A3206002
2
I3RH01322004-01
1
(A)
(B)
I3RH01322005-01
2
(A)
(B)
I3RH01322006-01
2) Install differential front mounting (1), and tighten
mounting bracket bolts (2) and mounting nut (3) to
specified torque.
Tightening torque
Differential front mounting bracket bolts (a): 50
N·m (5.0 kgf-m, 36.5 lb-ft)
Differential front mounting nut (b): 80 N·m (8.0
kgf-m, 58.0 lb-ft)
3, (b)
1
2, (a)
Rear Differential Rear Mounting Removal and
Installation
Removal
1) Hoist vehicle.
2) Remove stabilizer bar mount bolt (1) and stabilizer
bar bracket (2) installed on right side of vehicle.
3) Place jack (1) under rear differential.
4) Remove mounting bracket bolts (2), mounting bolts
(3) and differential rear mounting (4).
3
2
I3RH01322007-01
S3RH0A3206003
1
2
I3RH01322008-01
3
4
1
I3RH01322009-01