Power Supply Pcb Assy - Brother ADS-2600W Service Manual

(4) Remove the power supply harness guide while pushing the hook. Disconnect the power
supply PCB harness from the power supply PCB ASSY, and remove the power supply
upper frame from the power supply lower frame.
(5) Release the power harness from the securing fixture, and remove the power supply
harness holder.
(6) Remove the three taptite cup S M3x6 screws to remove the power supply PCB ASSY from
the power supply lower frame.
Taptite cup S M3x6
Power supply lower frame
Power supply
harness holder
Power supply
upper frame
HARNESS ROUTING: Refer to
Assembling Note:
• Check that the harness was not flawed when the inlet holder edge was attached to the
ferrite core.
Power harness
Power supply PCB harness
Fig. 3-36
"4. Power supply
3-38
Power supply harness holder

Power supply PCB ASSY

Hook
unit".
Power supply
harness guide
Confidential