4. TROUBLESHOOTING
4.1
Error Cause and Remedy
Error code 0B00 to 0D00
These errors do not usually occur during normal use. The possible causes are noise around
the installation site, fluctuation of the power supply voltage, and failures in the software.
---
An unidentified error occurred.
Step
1
Main PCB failure
Error code 0E00
---
Communication between the panel PCB and the main PCB cannot be established at
machine startup.
Step
Connection failure of the panel
1
PCB harness
2
Panel PCB failure
3
Main PCB failure
Error code 0F00 to 3A00
These errors do not usually occur during normal use. The possible causes are noise around
the installation site, fluctuation of the power supply voltage, and failures in the software.
---
An unidentified error occurred.
Step
1
Main PCB failure
Error code 3B00
Unable to Scan 3B
See Troubleshooting in User's Guide.
An error occurred during access to the DRAM in the main PCB.
Step
1
Main PCB failure
Cause
Replace the main PCB ASSY.
Cause
Reconnect the panel PCB harness.
Replace the panel PCB ASSY.
Replace the main PCB ASSY.
Cause
Replace the main PCB ASSY.
Cause
Replace the main PCB ASSY.
2-14
Remedy
Remedy
Remedy
Remedy
Confidential