Brother ADS-2600W Service Manual page 49

Error code E008

Unable to Update E008
Firmware can not be installed as other function is running.
Step
1 Main PCB failure
Error code E100

---
Program error
Step
1 Firmware installation failure
2 Main PCB failure
 Error code E200 to E400
These errors do not usually occur during normal use. The possible causes are noise around
the installation site, fluctuation of the power supply voltage, and failures in the software.
---
An unidentified error occurred.
Step
1 Main PCB failure
 Error code E600
Unable to Scan E6
See Troubleshooting in User's Guide.
Write error in the EEPROM of the main PCB
Step
1 Main PCB failure
Cause
Replace the main PCB ASSY.
Cause
Reinstall the latest firmware.
Replace the main PCB ASSY.
Cause
Replace the main PCB ASSY.
Cause
Replace the main PCB ASSY.
2-23
Remedy
Remedy
Remedy
Remedy
Confidential