Error code E001
Unable to Update 0001
Check the firmware update file and try again.
The capacity of machine memory reached its maximum when installing the firmware.
Error code E002
Unable to Update 0002
Check the firmware update file and try again.
Designated folder could not be found in USB flash memory when installing the firmware.
Error code E003
Unable to Update 0003
Check the firmware update file and try again.
Firmware file could not be found in USB flash memory when installing the firmware.
Error code E004
Unable to Update 0004
Check the firmware update file and try again.
Firmware in USB flash memory could not be accessed when installing the firmware.
Error code E005
Unable to Update 0005
Check the firmware update file and try again.
Firmware file in USB flash memory was broken when installing the firmware.
Error code E006
Unable to Update 0006
Check the firmware update file and try again.
The length of firmware file name exceeded the limit when installing the firmware.
Error code E007
Unable to Update 0007
Check the firmware update file and try again.
The machine detected uninstallable DJF file when installing the firmware.
<User Check>
• Disconnect and connect the AC power cord.
Step
USB flash memory data failure
1
2
USB flash memory failure
3
Main PCB failure
Cause
Replace the USB flash memory data to
uncorrupted one.
Replace the USB flash memory.
Replace the main PCB ASSY.
2-22
Remedy
Confidential