Adf Performance Test (Function Code: 08) - Brother ADS-2600W Service Manual

1.3.2 ADF performance test (function code: 08)

<Function>
This function is used to test the performance of the automatic document feeder (ADF). The
scanned pages of documents fed by the ADF are counted and the result is displayed on the
LCD.
<Operating Procedure>
(1) Set the documents in the ADF unit. "DOC. READY" is displayed on the LCD.
(2) Press the [0], and then the [8] key in the initial state of maintenance mode.
"ADF CHECK P.**" is displayed on the LCD, and the documents are ejected while the
scanned pages are counted. (** indicates the current count of the scanned pages.)
(3) When the
mode.
Note:
• If the front cover is open, "Close the ADF cover" is displayed on the LCD. Close the
front cover, and perform this function again.
• If no document is set in ADF, "NO DOCUMENT" is displayed on the LCD and the
machine returns to the ready state of maintenance mode.
button is pressed, the machine returns to the initial state of maintenance
5-5
Confidential