Brother ADS-2600W Service Manual page 39

Error Message
The page counter for the pick-up roller has reached the
Replace Roller
limit.
The first side or second side CIS flat cable is not
Scanner Error connected correctly (This problem occurs only in
maintenance mode).
Server Timeout/
Server time-out occurred or server was busy.
Server busy.
Attempted to register a new item when the memory is
Shortcuts Full
full.
Too Many Files on Scan to USB was executed when USB flash memory
USB reached its maximum file number was connected.
A USB device not within the specifications is connected
Unusable Device
to the USB terminal, resulting in overcurrent.
Unable to Scan An error occurred while scanning the image.
Unable to Update An error occurred while updating firmware.
Unusable USB A USB device not within the specifications is connected
Device to the USB terminal.
USB flash memory was disconnected while running
USB Access Error
Scan to USB.
USB Flash Memory
Can not communicate with USB memory.
Drive Error
USB Flash Memory
USB memory is full.
Drive is Full
USB Flash Memory Scan to USB was executed when no USB media was
Not Inserted connected.
USB Hub Not A USB device with a built-in hub is connected to the
Supported USB terminal.
USB Write- Scan to USB was executed when write-protected USB
protected flash memory is connected.
Different value were entered on password setting
screen and the subsequent verifying screen when
Wrong Password
trying to start scanning while Secure PDF is set as file
format.
Description
2-13
Error Refer
codes to:
- 2-36
B000 2-18
B800 2-18
B900 2-18
BB00 2-19
BD00 2-19
-
- 2-37
E001 2-22
CA00 2-20
3B00 2-14
A700 2-16
A900 2-17
E000 2-21
E100 2-23
E600 2-23
E001 2-22
E002 2-22
E003 2-22
E004 2-22
E005 2-22
E006 2-22
E007 2-22
2-23
E008
CA00 2-20
- 2-36
- 2-36
- 2-36
- 2-36
CA00 2-20
- 2-36
- 2-36
Confidential