Siemens RUGGEDCOM WIN5123 User Manual page 102

Chapter 5
Setup and Configuration
Figure 88: Radio Settings Screen
2. Configure the following parameter(s) as required:
Parameter
Maximum Tx Power
Power Boost on Contention
3. Click Apply.
4. Reboot the device. For more information, refer to
92
The maximum power in dBm that can be transmitted by the device. Any value can be
configured. However, the device will not exceed the following limits based on frequency
band and modulation.
Band
1.4 GHz
1.8 GHz
2.3 GHz
2.5 GHz
3.5 GHz
4.9 GHz
5.1 GHz
5.8 GHz
Synopsis: { On, Off }
Determines if transmission power is boosted on CDMA (Code Division Multiple
Accessbase) contention. When On, transmission power is boosted when another station
competes for the same bandwidth. When Off, transmission power is not boosted when
the SS detects contention. The default value is On.
Section 4.5, "Rebooting the Device"
Description
Modulation
BPSK, QPSK, QAM16
27 dBm
27 dBm
27 dBm
27 dBm
27 dBm
24 dBm
24 dBm
21 dBm
.
Configuring the WiMAX Radio
RUGGEDCOM WIN
User Guide
QAM64
24 dBm
24 dBm
24 dBm
24 dBm
24 dBm
21 dBm
21 dBm
21 dBm