Configuring The Mac Address Table - Siemens RUGGEDCOM WIN5123 User Manual

Chapter 5
Setup and Configuration
Figure 81: MAC Address Table Screen
The table provides the following information:
Parameter
Index
MAC Address
VLAN ID
Aging Time [sec]
Interface
Section 5.17.2

Configuring the MAC Address Table

The MAC Address Table displays the MAC addresses learned by the SS. To configure the MAC address aging time,
do the following:
Navigate to Network » Ethernet Settings » MAC Address Table. The MAC Address Table screen appears.
1.
86
Description
Displays a unique identifier for the table entry.
Displays the MAC address of a local or remote node.
Displays the identifier for the Virtual LAN on which the node is active.
Displays the time, in seconds, until the entry will be removed from the table.
Displays the interface from which the SS learned the MAC address.
Possible values include:
• Network — the base station acquired the address from the Ethernet network interface
• RF — the base station acquired the address from the RF interface
• Local — indicates the MAC address of the base station itself
RUGGEDCOM WIN
User Guide
Configuring the MAC Address Table