Siemens RUGGEDCOM WIN5123 User Manual page 59

RUGGEDCOM WIN
User Guide
Navigate to Management » Security » Radius Login Settings. The Radius Login Settings screen appears.
1.
Figure 45: Radius Login Settings Screen
2. Configure the following parameter(s) as required:
Parameter
Radius Login
Allow Local Login
Login AAA IP Address
Login AAA Port
Login AAA Secret
NAS ID
3. Click Apply.
Configuring RADIUS User Authentication
Description
Synopsis: { Enable, Disable }
Enables or disables RADIUS Authentication mode.
Synopsis: { Yes, No }
Enables or disables local login.
If local login is disabled, users cannot log in with the user name,
admin@local. Only users with user names configured in the
Permitted Users list can log in. For more information about the
Permitted Users list, refer to Section 4.7.1, "Adding Users"
NOTE
After local login has been disabled, users cannot
access the Security menu to enable local login while
there is an active connection to an AAA server. If
the connection to the configured AAA servers is lost,
local login will be enabled.
The configured Web Login AAA Server IP Address.
The configured Web Login AAA Server Port.
The configured Web Login AAA Server Secret.
The Radius NAS Identifier.
Chapter 4
System Administration
.
49