Sending Traps - Siemens RUGGEDCOM WIN5123 User Manual

Chapter 5
Setup and Configuration
Parameter
Trap Name
Activation Mode
Severity
Category
Description
3. Click Apply.
Section 5.12.2.5

Sending Traps

For testing purposes, selected traps can be sent on demand. To send traps, SNMP Trap Destinations must
be configured. For more information about configuring SNMP Trap Destinations, refer to
"Configuring Traps"
To send SNMP traps, do the following:
Navigate to Management » Alarms and Traps » Traps. The SNMP Trap Settings screen appears.
1.
Figure 69: SNMP Trap Settings
76
Description
Displays the trap name.
Synopsis: { True, False }
Indicates if the trap is enabled or disabled.
Synopsis: { Clear, Critical, Major, Warning }
Displays the severity of the trap condition.
Synopsis: { Restart, Communication, RF, Hardware, Security, Environmental,
Redundancy, Services, Link Status }
Displays the category of the trap condition.
Displays a description of the trap condition.
.
RUGGEDCOM WIN
User Guide
Section 5.12.2.4,
Sending Traps