Configuring Eap-Tls Authentication - Siemens RUGGEDCOM WIN5123 User Manual

Chapter 5
Setup and Configuration
Parameter
Configured Authentication
Outer NAI
Section 5.19.2

Configuring EAP-TLS Authentication

To configure Extensible Authentication Protocol - Transport Layer Security authentication (EAP-TLS), do the
following:
Navigate to WiMAX » Authentication. The Authentication Method screen appears.
1.
Figure 91: Authentication Method screen
2. Click Set TLS. The EAP TLS screen appears.
Figure 92: EAP TLS Screen
In the Realm parameter, type the authentication realm.
3.
4. Reboot the device. For more information, refer to
Section 5.19.3
Configuring EAP-TTLS Authentication
To configure Extensible Authentication Protocol - Tunneled Transport Layer Security authentication (EAP-TTLS), do
the following:
1. Navigate to WiMAX » Authentication. The Authentication Method screen appears.
94
Description
Displays the current configuration setting: Null or EAP.
Displays the outer Network Access Identifier.
Section 4.5, "Rebooting the Device"
RUGGEDCOM WIN
User Guide
.
Configuring EAP-TLS Authentication