Table of Contents
Advertisement
Chapter 3
Device Management
Parameter
UDP Port (1-65535)
3.
Click Apply.
Section 3.2
Viewing Device Hardware Information
To view device hardware information, navigate to Statistics » Device Info. The Device Info screen appears.
Figure 11: Device Info Screen
The table provides the following information:
Parameter
Serial Number
Calibration Version
RF ID
HW ID
Section 3.3
Viewing Statistics
This section describes how to view statistics collected by RUGGEDCOM WIN.
CONTENTS
•
Section 3.3.1, "Viewing General Statistics"
•
Section 3.3.2, "Viewing and Clearing RF Statistics"
•
Section 3.3.3, "Viewing and Clearing Network Statistics"
18
Description
Sets the IP address of the server to which log files are uploaded.
Synopsis: Number in the range of 1 to 65535
Default: 514
Sets the UDP port on the server to use when uploading the log
files to the server.
Description
Displays the device's serial number.
Displays the device's calibration version.
Displays the device's radio frequency identification number.
Displays the devices's hardware identification number.
RUGGEDCOM WIN
Viewing Device Hardware Information
User Guide
Hide quick links:
Advertisement
Table of Contents
