Table of Contents
Advertisement
Chapter 5
Setup and Configuration
Parameter
SNMP Write Community
SNMP Trap Community
5.
Click Apply.
Section 5.12.4
Managing SNMPv3
This section describes how to manage SNMPv3.
CONTENTS
•
Section 5.12.4.1, "Adding SNMPv3 Users"
•
Section 5.12.4.2, "Deleting SNMPv3 Users"
•
Section 5.12.4.3, "Viewing SNMPv3 Access Groups"
Section 5.12.4.1
Adding SNMPv3 Users
To add an SNMPv3 user, do the following:
1.
Navigate to Management » SNMP. The SNMP General Settings screen appears.
2.
Click SNMPv3 Configuration. The SNMPv3 Configuration screen appears.
78
Description
Read Community name must be different from the SNMP Write
Community name.
Default: private
The SNMP community name for write access. This name can
be used as a password for secure set commands. The SNMP
Write Community name must be different from the SNMP Read
Community name.
Default: public
The SNMP community name to use when the SNMP service
receives a request that does not contain the correct community
name and does not match an accepted host name.
RUGGEDCOM WIN
User Guide
Managing SNMPv3
Hide quick links:
Advertisement
Table of Contents
