Siemens RUGGEDCOM WIN5123 User Manual page 99

RUGGEDCOM WIN
User Guide
1
Figure 85: Access List Screen
1. Add 2. Delete
2. Configure the following parameter(s) as required:
Parameter
Access List
Total Number of Entries
Max Number of Self-Learned Entries
3. Configure the following parameter(s) as required:
Parameter
MAC Address
Status
Type
4. Click Apply.
Configuring the Access List
2
Description
Synopsis: { Enable, Disable }
Displays the setting for the Access List.
Displays the number of entries.
Default: 1
Displays the maximum number of Self-Learned Entries
Description
Displays the MAC Address.
Synopsis: { Sticky, Non-Sticky }
Displays the Status. Sticky addresses remain in the table after a
reboot. Non-Sticky addresses are cleared from the table after a
reboot.
Synopsis: { Self-Learned, Preprovisioned }
Displays Self-Learned Entries.
Chapter 5
Setup and Configuration
89