RUGGEDCOM WIN
User Guide
Figure 47: Scanner Settings Screen
1. Add 2. Delete
2.
Select a row and click Delete to remove a row from the table.
Or
Click Delete All to delete all scanning configuration information.
3.
Click Apply.
Section 5.2.3
Connecting to the Base Station
To connect to base stations, do the following:
1.
If this is the first time connecting to a base station, you must configure the scanner first. For more
information, refer to
Navigate to Management » System Functions. The System Functions screen appears.
2.
Connecting to the Base Station
1
2
Section 5.2.1, "Configuring the Scanner"
.
Chapter 5
Setup and Configuration
55