Configuring Null Authentication - Siemens RUGGEDCOM WIN5123 User Manual

RUGGEDCOM WIN
User Guide
Figure 93: Authentication Method screen
Click Set TTLS. The EAP TTLS screen appears.
2.
Figure 94: EAP TTLS Screen
3. Configure the following parameter(s) as required:
Parameter
Realm
Username
Password
Confirm Password
4. Click Apply.
5. Reboot the device. For more information, refer to
Section 5.19.4

Configuring Null Authentication

To enable null authentication, do the following:
Navigate to WiMAX » Authentication. The Authentication Method screen appears.
1.
Configuring Null Authentication
Description
The EAP-TTLS authentication realm.
The EAP-TTLS user name.
The password for the EAP-TTLS user.
The password for the EAP-TTLS user, retyped to confirm it.
Section 4.5, "Rebooting the Device"
Chapter 5
Setup and Configuration
.
95