Siemens RUGGEDCOM WIN5123 User Manual page 63

RUGGEDCOM WIN
User Guide
• the transmission preamble
• the CINR R1 value
• the RSSI value, in dBm
To configure the scanner, do the following:
Navigate to WiMAX. The Scanner Settings screen appears.
1.
Figure 46: Scanner Settings Screen
1. Add 2. Delete
2. Click Disconnect.
3. In the Autoconnect CINR threshold parameter, type a value to define the threshold.
4. Click Add. A new row appears in the table. You can add up to 32 rows to the table.
5. Configure the following parameter(s) as required:
Parameter
Priority
Bandwidth [MHz]
Start frequency [kHz]
Configuring the Scanner
1 2
Description
Synopsis: A numeric value.
Sets the priority for the scanning table entry. Priority is ranked in
numeric order.
Synopsis: {3.5MHz, 5MHz, 7MHz, 10MHz}
Displays the bandwidth of the scanning table entry.
Displays the start of the scanning range as a frequency in
kilohertz.
Chapter 5
Setup and Configuration
53