Snmp Traps - Siemens RUGGEDCOM ROS v4.3 User Manual

Chapter 1
Introduction
File Name
RC-SNMPv2-MIB-AC.mib
RC-UDP-MIB-AC.mib
RC-TCP-MIB-AC.mib
RC-SNMP-USER-BASED-SM-MIB-AC.mib
RC-SNMP-VIEW-BASED-ACM-MIB-AC.mib
RC-IF-MIB-AC.mib
RC-BRIDGE-MIB-AC.mib
RC-RMON-MIB-AC.mib
RC-Q-BRIDGE-MIB-AC.mib
RC-IP-MIB-AC.mib
RC-LLDP-MIB-AC.mib
RC-LAG-MIB-AC.mib
RC_RSTP-MIB-AC.mib
RC-RUGGEDCOM-DOT11-MIB-AC.mib
RC-RUGGEDCOM-POE-MIB-AC.mib
RC-RUGGEDCOM-STP-AC-MIB.mib
RC-RUGGEDCOM-SYS-INFO-MIB-AC.mib
RC-RUGGEDCOM-TRAPS-MIB-AC.mib
RUGGEDCOM_RS-232-MIB-AC.mib
RC-RUGGEDCOM-SERIAL-MIB-AC.mib
Section 1.7

SNMP Traps

The device generates the following standard traps:
Table: Standard Traps
Trap
linkDown
linkUp
authenticationFailure
coldStart
newRoot
topologyChage
risingAlarm
14
MIB Name
RC-SNMPv2-MIB-AC
RC-UDP-MIB-AC
RC-TCP-MIB-AC
RC-SNMP-USER-BASED-SM-MIB-AC
RC-SNMP-VIEW-BASED-ACM-MIB-AC
RC-IF-MIB-AC
RC-BRIDGE-MIB-AC
RC-RMON-MIB-AC
RC-Q-BRIDGE-MIB-AC
RC-IP-MIB-AC
RC-LLDP-MIB-AC
RC-LAG-MIB-AC
RC_RSTP-MIB-AC
RC-RUGGEDCOM-DOT11-MIB-AC
RC-RUGGEDCOM-POE-MIB-AC
RC-RUGGEDCOM-STP-AC-MIB
RC-RUGGEDCOM-SYS-INFO-MIB-AC
RC-RUGGEDCOM-TRAPS-MIB-AC
RUGGEDCOM_RS-232-MIB-AC
RC-RUGGEDCOM-SERIAL-MIB-AC
MIB
IF-MIB
SNMPv2-MIB
BRIDGE-MIB
RMON-MIB
Supported MIB
SNMPv2-MIB
UDP-MIB
TCP-MIB
SNMP-USER-BASED-SM-MIB-AC
SNMP-VIEW-BASED-ACM-MIB-AC
IF-MIB
BRIDGE-MIB
RMON-MIB
Q-BRIDGE-MIB
IP-MIB
LLDP-MIB
IEEE8023-LAG-MIB
RSTP-MIB
RUGGEDCOM-DOT11- MIB
RUGGEDCOM-POE-MIB
RUGGEDCOM-STP-MIB
RUGGEDCOM-SYS-INFO-MIB
RUGGEDCOM-TRAPS-MIB
RS-232-MIB
RUGGEDCOM-SERIAL-MIB
RUGGEDCOM ROS
User Guide
SNMP Traps