Siemens RUGGEDCOM ROS v4.3 User Manual page 145

RUGGEDCOM ROS
User Guide
Figure 72: RADIUS Server Table
2. Select either Primary or Backup from the table. The RADIUS Server form appears.
6
Figure 73: RADIUS Server Form
1. Server Box 2. IP Address Box 3. Auth UDP Port Box 4. Auth Key Box 5. Confirm Auth Key Box 6. Apply Button 7. Reload
Button
3. Configure the following parameter(s) as required:
Parameter
Server
IP Address
Auth UDP Port
Auth Key
Confirm Auth Key
4. Click Apply.
Configuring the RADIUS Client
Description
Synopsis: Any 8 characters
Default: Primary
This field tells whether this configuration is for a Primary or a
Backup Server.
Synopsis: ###.###.###.### where ### ranges from 0 to 255
The Server IP Address.
Synopsis: 1 to 65535
Default: 1812
The IP Port on server.
Synopsis: 31 character ASCII string
The authentication key to be shared with server.
Synopsis: 31 character ASCII string
The authentication key to be shared with server.
Chapter 4
System Administration
1
2
3
4
5
7
129