Configuring Priority To Cos Mapping - Siemens RUGGEDCOM ROS v4.3 User Manual

Chapter 5
Setup and Configuration
Parameter
Click Apply.
4.
Section 5.3.3

Configuring Priority to CoS Mapping

Frames received untagged can be automatically assigned a CoS based on their priority level.
To map a priority level to a CoS, do the following:
1. Navigate to Classes of Service » Configure Priority to CoS Mapping . The Priority to CoS Mapping table
appears.
Figure 110: Priority to CoS Mapping Table
2. Select a priority level. The Priority to CoS Mapping form appears.
3
Figure 111: Priority to CoS Mapping Form
1. Priority Box 2. CoS List 3. Apply Button 4. Reload Button
3. Configure the following parameter(s) as required:
Parameter
Priority
184
Description
is enabled the switch will use the Differentiated Services bits in
the TOS field.
Description
Synopsis: 0 to 7
Default: 0
Configuring Priority to CoS Mapping
RUGGEDCOM ROS
User Guide
1
2
4