Siemens RUGGEDCOM ROS v4.3 User Manual page 138

Chapter 4
System Administration
Weak Password Configured
RUGGEDCOM ROS generates this alarm and logs a message in the syslog when a weak password is configured in
the Passwords table.
Message Name
Weak Password Configured
Default Keys In Use
RUGGEDCOM ROS generates this alarm and logs a message in the syslog when default keys are in use. For more
information about default keys, refer to
NOTE
For Non-Controlled (NC) versions of RUGGEDCOM ROS, this alarm is only generated when default SSL
keys are in use.
Message Name
Default Keys In Use
Login and Logout Information
RUGGEDCOM ROS generates this alarm and logs a message in the syslog when a successful and unsuccessful login
attempt occurs. A message is also logged in the syslog when a user with a certain privilege level is logged out
from the device.
Login attempts are logged regardless of how the user accesses the device (i.e. SSH, Web, Console, Telnet or RSH).
However, when a user logs out, a message is only logged when the user is accessing the device through SSH,
Telnet or Console.
Message Name
Successful Login
Failed Login
User Logout
Excessive Failed Login Attempts
RUGGEDCOM ROS generates this alarm and logs a message in the syslog after 10 failed login attempts by a user
occur within a span of five minutes. Furthermore, the service the user attempted to access will be blocked for one
hour to prevent further attempts.
Message Name
Excessive Failed Login Attempts
RADIUS Server Unreachable
RUGGEDCOM ROS generates this alarm and logs a message in the syslog when the primary RADIUS server is
unreachable.
122
Alarm
Yes
Section 1.9, "SSH and SSL Keys and Certificates"
Alarm
Yes
Alarm
Yes
Yes
No
Alarm
Yes
SNMP Trap
Yes
SNMP Trap
Yes
SNMP Trap
Yes
Yes
No
SNMP Trap
Yes
Security Alarms for Login Authentication
RUGGEDCOM ROS
User Guide
Syslog
Yes
.
Syslog
Yes
Syslog
Yes
Yes
Yes
Syslog
Yes