Viewing A List Of Remote Syslog Servers - Siemens RUGGEDCOM ROS v4.3 User Manual

Chapter 3
Device Management
2
Figure 14: Remote Syslog Client Form
1. UDP Port 2. Apply Button 3. Reload Button
2. Configure the following parameter(s) as required:
Parameter
UDP Port
3. Click Apply.
Section 3.5.4.2

Viewing a List of Remote Syslog Servers

To view a list of known remote syslog servers, navigate to Administration » Configure Syslog » Configure
Remote Syslog Server . The Remote Syslog Server table appears.
Figure 15: Remote Syslog Server Table
If remote syslog servers have not been configured, add the servers as needed. For more information, refer to
Section 3.5.4.3, "Adding a Remote Syslog Server"
62
Description
Synopsis: 1025 to 65535 or { 514 }
Default: 514
The local UDP port through which the client sends information to
the server(s).
.
Viewing a List of Remote Syslog Servers
RUGGEDCOM ROS
User Guide
1
3