Viewing Statistics For Port Mstis - Siemens RUGGEDCOM ROS v4.3 User Manual

RUGGEDCOM ROS
User Guide
Parameter
Section 5.2.9.2

Viewing Statistics for Port MSTIs

To view statistics for port MSTIs, navigate to Spanning Tree » View Port MSTI Statistics . The Port MSTI
Statistics form appears.
1
Figure 101: Port MSTI Statistics Form
1. Instance ID Box 2. Get Button
This table displays the following information:
Parameter
Port(s)
Status
Role
Viewing Statistics for Port MSTIs
Description
Excessively high or rapidly increasing counts signal network
problems.
Description
Synopsis: Any combination of numbers valid for this parameter
The port number as seen on the front plate silkscreen of the switch
(or a list of ports, if aggregated in a port trunk).
Synopsis: { Disabled, Listening, Learning, Forwarding, Blocking,
Link Down, Discarding }
tatus of this port in Spanning Tree. This may be one of the following:
• Disabled - STP is disabled on this port.
• Link Down - STP is enabled on this port but the link is down.
• Discarding - The link is not used in the STP topology but is
standing by.
• Learning - The port is learning MAC addresses in order to prevent
flooding when it begins forwarding traffic.
• Forwarding - The port is forwarding traffic.
Synopsis: { , Root, Designated, Alternate, Backup, Master }
Chapter 5
Setup and Configuration
2
175